Silvercrest 305856, Руководство по эксплуатации

Страница: 30 / 130

GB
│
IE
│ 27 ■ SAST 18 A1
Installation of the wall bracket
DANGER – ELECTRIC SHOCK!
► Ensure that there are no power cables or water pipes in the wall at the
location where you intend to drill the holes for the wall bracket
.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Select a suitable installation location for the wall bracket :
It must be possible to remove the handheld vacuum cleaner easily and there
must be a mains power socket nearby. In addition, there should be no power
or water lines in the wall.
2) Drill two holes below each other at a distance of approx. 110 mm from each
other. The drill holes must be suitable for 5 mm wall plugs.
3) Push in the wall plugs and screw in the screws so that the heads protrude a
few millimetres.
4) Hang the wall bracket with the drill holes over the two screws and
ensure that the screws slide into the slots. The wall bracket should lie flush
against the wall. You can adjust the distance to the wall and compensate for
any unevenness in the wall by screwing in or unscrewing the screws.
5) Ensure that the power cable is not trapped and that it lies properly in the
cut-out.
6) Push the two accessories holders into the respective catches on the left
and right of the wall bracket . You can place the nozzles in the accessories
holders .
7) Place the barrel plug of the power adapter into the wall bracket
from below. Secure the barrel plug by turning it.
8) Plug the mains adapter into a power socket.
Charging
NOTE
► Check to ensure that the On/Off switch - has been pushed back (to the
position "OFF") before starting the charging process.
■ Hang the appliance into the wall bracket from above. The catches on
the wall bracket should slide into the recesses on the motor unit . and
the barrel plug into the socket on the lower end of the motor unit . . The
charge indicator lamp
3
flashes red and the charging process begins.
■ When charging is complete, which can take around 5 to 5.5 hours with
fully discharged batteries, the charge indicator lamp
3 lights up green.
The appliance automatically switches to trickle charging. Nevertheless, in
order to avoid possible damage to the batteries, do not leave the appliance
permanently connected to the mains adapter
.