Silvercrest 296789, Руководство по эксплуатации

Страница: 93 / 123

■ 90 │
GB
│
MT
SEM 1100 B3
Cleaning the hot water shower
Clean the hot water shower
r
after each use:
1) After you have prepared the espresso/cappuccino and removed the sieve
holder
u
, wipe the entire surface of the hot water shower
r
with a mois-
tened cloth to remove all powder residues .
2) Replace the sieve holder
u
without the espresso filters
i o
.
3) Place an empty cup under the sieve holder
u
and press the “Espresso”
button
3
down until it clicks in . Water flows out of the hot water shower
r
rinsing out the remaining powder residue .
4) After about 20 seconds, press the “Espresso” button
3
again and
switch the appliance off with the On/Off switch
1
.
5) Remove the sieve holder
u
again .
Cleaning the accessories
1) Clean the sieve holder
u
, the two espresso sieves
i o
, water tank
9
, the
measuring spoon
p
and the drip grille
q
in warm water .
NoTE
► If you put detergent into the water, it may effect the taste of the espresso .
If the stains can only be removed with detergent, always rinse the items
afterwards with lots of clean water .
2) Dry all parts well .
3) The drip tray
w
is suitable for cleaning in the dishwasher . However, always
remove the red float from the drip tray
w
before cleaning:
–
To do this, remove the stoppers attached to the two retaining bars to the
side of the float .
–
Pull the float from the retaining bars .
–
Clean the float and stoppers .
–
After cleaning the drip tray
w
, push the cleaned float back onto the
retaining bars and replace the stoppers .
Cleaning the appliance
Clean the appliance with a moist cloth . If necessary, use a little detergent on the cloth .
Ensure that the appliance is completely dry before the next use .