1. Open the box and checking
Congratulations on choosing our products! Please carefully read this instruction manual in its
entirety and keep it well for using reference. This manual contained about the installation and the
relative using information of this products. Please according to this manual's relative speaking when
using this equipment.
This equipment was made of new style, high intensity plastic . It fully shows the modem times
light characteristic with beauty structure. And it was made according to CE standard. Fully up the
international standard of DMX512 agreement. Master or slave in phase control. Can be use in large
entertainment, theater, performing and playing hall, etc.
This product uses MSR 250/2 electrical arc lamp. When receiving this product please carefully
bring and put; and check that whether this equipment has been damaged or not during transportation.
And please also check the following thing was enclosed:
Signal line ----------------------- one piece Safety string ----------------------- one pieces
User Manual----------------------- one set
Every person involved with installation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
eep this device away from rain and moisture!
nplug mains lead before opening the housing!
OR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
EFORE YOU INITIAL START - UP!
his device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes writtenin this manual.
he manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not
subject to warranty.
Never let the power-cord come into contact with other cables! Handle the power-cord
and all connections with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Always plug in the power plug least. Make sure that the power-switch is set to OFF-
position before you connect the device to the mains. The power-plug has to be
accessable after installing the device.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the powercord from time to time.
2. Safety instructions
CAUTION:
Important:
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
K
U
F
B
T
B
W
e careful with your operations.
ith a high voltage you can suffer a dangerous electric shock when touching the
wires!
T
-1-
