5 Connection to the mains
.5
Verify the power supply settings before applying power!
The occupation of the connection-cables is as follows
If you wish to change the power supply settings,see the chapter Appendix.
Connect the fixture to the mains with the enclosed power cable and plug.
The earth has to be connected!
:
Pin
Cable (EU)
International
Brown
Light blue
ellow/Green
Y
Black
White
Green
Live
Neutral
Earth
L
N
Cable (US)
5.5 DMX-512 connection/connection between fixtures
-6-
holde
¾
¾
Before rigging make sure that the installation area can hold a minimum point load of 10
times the projector s weight.
The projector can be placed directly on the stage floor or rigged in any orientation on a
truss without altering its operation characteristics.
For overhead use, always install a safety-rope that can hold at least 10 times the weight
of the fixture. You must only use safety-ropes with screw-on carabines. Pull the safety-
rope through the two apertures on the bottom of the base and over the trussing system
¾
