1
3
13.1
Fitting & operating the hood on
the Seat unit.
13.1
To attach the hood, locate the
mounting holes on the Sleepover
seat unit arms and insert the hood
attachments.
Fasten the press studs on the hood to
the seat unit - two at the back and
one at each side.
13.2
To remove the hood, firstly, undo the 4
press studs from the Sleepover hood -
two at the back and one at each side.
Press the button on the Sleepover
seat unit arms and lift the hood out.
CAUTION: FAILURE TO PRESS
THE RELEASE BUTTON MAY
RESULT IN DAMAGE TO
YOUR PRODUCT.
13.3
The Sleepover hood is multi positional.
Simply hold the front bar and gently
lift and lower.
13.4
Your Sleepover hood has a ventilation
panel underneath the rear panel and
a pop-out sun visor. (see 5.3)
13.2
13.3
