CONCRETE MIXER MOD.: PO 500
GB
Operating, maintenance, spare parts manual Rèv. 3 of 12/10/18
Page
15 di 40
INDEX
1. INTRODUCTION
This manual is directed at the user and operator who will be responsible for the safe,
efficient and trouble free operation of the machine. Read and understand this manual and always follow the safety
precautions stated in the Instruction and Safety Manual. Keep this manual handy for frequent reference and to pass on to new
operators or owners. The machine is equipped with tested special safety devices and safety systems. SILLA cannot be held
responsible for unauthorized modifications or procedures, replacements and/or all other modifications changing the use the
machine has been designed and manufactured for.
Warranty:
The mechanical and electrical products of the machine, which are not normal service items, have a one-year
warranty starting from the date of the sale. The warranty does not cover the normal service items like tools, driving belts,
liquids and oils. The defective or not properly working products will be replaced by the Technical Personnel of the
Manufacturer of the machine, after the defective product has been proven to be defective. The warranty does not cover the
products in case of modification, abuse, misuse, improper use, negligence or improper maintenance (routine and
extraordinary maintenance) as shown by this I.M. This warranty is valid in the territory of the European Community. The
consumer is the right holder according to the applicable national laws governing the sale of consumables and this warranty
makes those rights unprejudiced.
2. MARKING
A label with the following machine identification data is installed on the machine:
- EC mark according to EC directive 98/37, Enclosure II, Part A; - Machine type; - Serial or part number;
- Name and address of the manufacturer and/or legal representative in Europe; - Year of construction;
- Weight of the machine; - Voltage; frequency; phases; - Max. rating; - Ready mixed product in litres;
- Loading capacity.
SILLA
Macchine Edili e Stradali
For assistance and information or spare parts, refer to: Via S.Gimignano , 96 53036 – POGGIBONSI (SI) – ITALY
Tel. ++39-0577 - 938051
Fax. ++39-0577 – 981609
This INSTRUCTION MANUAL and all the enclosed documents are freehold property of the Company SILLA.
Reproduction
(in any form or way inclusive recording and photocopy) in whole and/or part is forbidden without the written
authorisation of the Company SILLA.
In case this Instruction Manual should get lost or destroyed ask the Company SILLA for a complete copy.
LIST OF ABBREVIATIONS AND DEFINITIONS USED IN THIS MANUAL
I.M.
Instruction Manual
M.D.
Machine Directive
L.V.D.
Low Voltage Directive
E.C.D.
Electromagnetic Compatibility Directive
a.s.l.
Above sea level
Caution: precautions and instructions to be strictly followed.
Page
Page
1
INTRODUCTION
15
6.2
Adjusting the pressure of the oil-hydraulic unit
20
2
MARKING
15
6.3
Adjustment of belts tension
20
2
ABBREVIATION LIST
15
6.3.1
Tension of the belts between engine and pump support
20
3
GENERAL PRECAUTIONS
16
6.3.2
Tension of belts of drum rotation.
20
4
CHARACTERISTICS
16
4.1
Description of the machine
16
7
OPERATION
20
4.2
Technical characteristics and
overall dimensions
17
7.1
Controls and location areas
20
4.3
Limits for use, space, life
17
7.2
Operation cycle
21
4.4
Noise
17
7.3
Safety precautions
21
4.5
Conformity with safety regulations
17
8
MAINTENANCE
22
5
INSTALLATION
18
8.1
Preventive (routine) maintenance
22
5.1
Transport
18
8.2
Corrective maintenance
22
5.2
Placing and grounding
18
8.3
Troubleshooting
23
5.3
Areas of respect and dimensions
18
8.4
Replacing the driving belt
23
5.4
Assembling of the machine
19
8.5
Ordering spare parts
23
5.5
Electrical installation
19
9
DISMANTLING
23
5.6
Electric schedule
19
9.1
Disassembling and dismantling
23
5.7
Putting into operation
20
9.2
Disposal
23
5.8
Training
20
10
DECLARATION OF CONFORMITY
11
6
ADJUSTMENTS
20
11
WARRANTY REGISTRATION FORM
25
6.1
Adjusting the machine
20
12
SPARE PARTS MANUAL
de 27
