background image

3.3  Diagnostics

The Diagnostics tab offers a network test and logging options.

The network test sends rapid on/off commands to a selected light in order to determine several key performance metrics of the ZigBee
network. It is configured by selecting the desired light, setting the period (ms) and iterations, and selecting “Run Network Test”. The test
measures network throughput and RF conditions. The “Refresh Log” button will update the test output tab.

The result is shown in the Test Output log tab, and the log file is located here: 

/opt/SiliconLabsGateway/webserver/logs/Customer

Test.log

. For information about accessing this file, refer to Sections 

6.1 Transfer Files to and from the Gateway

 or 

6.2 Remote Login

to the Gateway

.

The  backend  output  tab  displays  all  web  server  command  routing.  The  “Console  Log  Streaming”  option  enables  log  updates  to  the
backend output tab. The “Advanced Callback Logging” option enables extra statistic logging such as: message time stamps, acknowl-
edgement  errors,  link  quality  (LQI),  and  receive  signal  strength  (RSSI).  In  typical  use,  logging  this  information  is  not  necessary,  and
disabling this option reduces gateway overhead.

The backend output log file is located here: 

/opt/SiliconLabsGateway/webserver/logs/GatewayTransport.log

The gateway output tab shows all ZigBee gateway commands and data. The “Console Log Streaming” option enables log updates to
the gateway output tab. In typical use, logging this information is not necessary, and disabling this option reduces gateway traffic and
overhead. The gateway output tab can also be used to send command line interface (CLI) commands.

The gateway output log file is located here: 

/opt/SiliconLabsGateway/logs/gateway.log

3.4  About

The About tab shows all versions and displays the web server IPv4 address for the purpose of connecting a mobile handset, tablet, or
another computer to the gateway.

Note:

 The “Running on IP” address is updated when refreshing the browser window.

3.5  Shutdown

Remove power to shutdown the gateway.

UG131: ZigBee

®

 Wi-Fi/Ethernet Gateway Reference Design (RD-0001-0201) User's Guide

Run the ZigBee Gateway

silabs.com

 | Smart. Connected. Energy-friendly.

Rev. 0.3  |  6

Содержание ZigBee RD-0001-0201














Отзывы: