2. Installation and Configuration
2.1 Install the Silicon Labs EM3588 ZigBee USB Stick
Figure 2.1. ZigBee Wi-Fi/Ethernet Gateway
2.2 Supply Power to the Gateway
Connect power with the included micro-USB power adapter. The red power LED will illuminate on the Gateway and the green activity
LED will blink until the boot process has completed.
2.3 Connect to the Gateway Wi-Fi Access Point from a Handset, Tablet, or PC
Select the SSID “Silicon Labs ZigBee ABCD” where "ABCD" is an arbitrary hex number. Enter the passphrase “solutions” when promp-
ted.
Figure 2.2. Wireless Network Connections (Windows)
2.4 Connect the Gateway to the Internet with Ethernet
Note:
The Internet connection with Ethernet is only required when installing or updating software, as described in the step below.
2.5 Install or Update Gateway Software
Launch a browser and navigate to
http://192.168.42.1:3001/update
to review the license agreement and download gateway software.
You can return to this page to check for periodic updates. After the gateway software installs, the gateway will reboot and it will be
necessary to repeat step 2.3.
Note:
Internet connection with Ethernet is only required when installing or updating software.
UG131: ZigBee
®
Wi-Fi/Ethernet Gateway Reference Design (RD-0001-0201) User's Guide
Installation and Configuration
silabs.com
| Smart. Connected. Energy-friendly.
Rev. 0.3 | 2
