Silicon Graphics UV 30 Скачать руководство пользователя | Manualshive

Страница: 2 / 66

background image

COPYRIGHT

© 2015 Silicon Graphics International Corp. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No
permission is granted to copy, distribute, or create derivative works from the contents of this electronic documentation in any manner, in whole or in part,
without the prior written permission of SGI.

LIMITED RIGHTS LEGEND

The software described in this document is “commercial computer software” provided with restricted rights (except as to included open/free source) as specified
in the FAR 52.227-19 and/or the DFAR 227.7202, or successive sections. Use beyond license provisions is a violation of worldwide intellectual property laws,
treaties and conventions. This document is provided with limited rights as defined in 52.227-14.

The electronic (software) version of this document was developed at private expense; if acquired under an agreement with the USA government or any
contractor thereto, it is acquired as “commercial computer software” subject to the provisions of its applicable license agreement, as specified in (a) 48 CFR
12.212 of the FAR; or, if acquired for Department of Defense units, (b) 48 CFR 227-7202 of the DoD FAR Supplement; or sections succeeding thereto.
Contractor/manufacturer is SGI, 46600 Landing Parkway, Fremont, CA 94538.

TRADEMARKS AND ATTRIBUTIONS

Silicon Graphics, SGI, and the SGI logo, and Supportfolio are trademarks or registered trademarks of Silicon Graphics International Corp. in the United States
and/or other countries worldwide.

ASPEED is a registered trademark of ASPEED. InfiniBand is a registered trademark of the InfiniBand Trade Association. Intel, Itanium, and Xeon are
trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. ConnectX and Mellonox are registered
trademarks of Mellonox Technologies, Ltd. Internet Explorer and MS-DOS are registered trademarks of Microsoft Corporation. Java and Java Virtual Machine
are trademarks or registered trademarks of Sun Microsystems, Inc. Linux is a registered trademark of Linus Torvalds, used with permission by SGI. Matrox is
a registered trademark of Matrox Electronic Systems Ltd. Novell and Novell Netware are registered trademarks of Novell Inc. PCIe and PCI-X are registered
trademarks of PCI SIG. Red Hat and all Red Hat-based trademarks are trademarks or registered trademarks of Red Hat, Inc. in the United States and other
countries. SUSE LINUX and the SUSE logo are registered trademarks of Novell, Inc. UNIX is a registered trademark in the United States and other countries,
licensed exclusively through X/Open Company, Ltd.

All other trademarks mentioned herein are the property of their respective owners.

Adaptec, Host, and the Adaptec logo are registered trademarks of Adaptec Inc.

«
1
2
3
4
...
»

Содержание UV 30



































































Отзывы:

Нет отзывов

Похожие инструкции для UV 30

ColorPASS-Z5000

Бренд: Canon Страницы: 130

Бренд: NEC Страницы: 151

Бренд: Omega Страницы: 16

Бренд: Valcom Страницы: 4

Бренд: Sollae Systems Страницы: 45

BACnet/IP Server-SUNWAYS

Бренд: IntesisBox Страницы: 5

FusionServer XH321 V5

Бренд: xFusion Digital Technologies Страницы: 76

Бренд: MAXDATA Страницы: 2

Бренд: MAXDATA Страницы: 6

Бренд: LevelOne Страницы: 53

Бренд: Amulet Hotkey Страницы: 2

USR-WIFI232-630

Бренд: USR IOT Страницы: 44

Бренд: Polycom Страницы: 34

G4-Apex-ENTERPRISE-HW

Бренд: Viavi Страницы: 8

Бренд: Measy Страницы: 15

SuperStorageSystem SSG-2028R-DN2R24L

Бренд: Supermicro Страницы: 82

TwinPro 1029TP-DC0R

Бренд: Supermicro Страницы: 136

Бренд: Mirapoint Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды