Silicon Graphics InfiniteStorage 3500, Руководство пользователя, Страница: 90 / 106

70 007-5653-001
6: BIOS
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel to keep the
BMC System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure that you no longer
need any data stored in the log before clearing the BMC Event Log.
Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address as shown in the
following graphics.
Channel Number - Enter the channel number for the SET LAN Config command. This is initially
set to [1] . Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status -This feature returns the channel status for the Channel Number
selected above: "Channel Number is OK" or "Wrong Channel Number".
IP Address Configuration
This submenu displays the following IP address configuration information.
Parameter Selector
Use this feature to select the parameter of your IP Address configuration.
IP Address Source
Allows you to determine how an IP address is assigned to this device. Select Dynamic Host
Configuration Protocol (DHCP) to allow this device to obtain an IP address from a DHCP server,
which manages a pool of IP addresses and network information on a “request and grant” basis.
Upon time-out (or lease expiration), the IP address assigned to the client can be re-assigned to a
new client.) Select
Static (Static Allocation) to manually enter an IP address based on a
pre-determined range of addresses (usually assigned by a network administrator). Only clients
with an IP address within the pre-determined range of addresses will be allowed access to the
!