manualshive.com logo in svg

Silicon Graphics InfiniteStorage 3500, Руководство пользователя, Страница: 75 / 106

Поделиться
Скачать
Silicon Graphics InfiniteStorage 3500 Скачать руководство пользователя страница 75

Advanced Setup Configurations

007-5653-001

55

Max CPUID Value Limit (Available when supported by the CPU)

Sets the maximum CPUID Value. Select Disabled for Microsoft Windows XP. The options are 
Enabled and 

Disabled

.

Intel Virtualization Technology (Available when supported by the CPU) 

Select Enabled to use the feature of Virtualization Technology to allow one platform to run 
multiple operating systems and applications in independent partitions, creating multiple "virtual" 
systems in one physical computer. The options are 

Enabled

 and Disabled.

Note:  

If there is any change to this setting, you will need to power off and restart the system for 

the change to take effect. Please refer to Intel’s web site for detailed information. 

Execute-Disable Bit Capability (Available when supported by the OS and the CPU) 

Set to Enabled to enable the Execute Disable Bit which will allow the processor to designate areas 
in the system memory where an application code can execute and where it cannot, thus preventing 
a worm or a virus from flooding illegal codes to overwhelm the processor or damage the system 
during an attack. The default is 

Enabled

. (Refer to Intel and Microsoft web sites for more 

information.) 

Simultaneous Multi-Threading (Available when supported by the CPU) 

Set to Enabled to use the Simultaneous Multi-Threading Technology, which will result in 
increased CPU performance. The options are Disabled and 

Enabled

.

Active Processor Cores 

Set to Enabled to use a processor's Second Core and beyond. (Please refer to Intel's web site for 
more information.) The options are 

All

, 1 and 2.

Intel EIST Technology 

Enhanced Intel SpeedStep Technology (EIST) allows the system to automatically adjust processor 
voltage and core frequency in an effort to reduce power consumption and heat dissipation. Please 
refer to Intel’s web site for detailed information. The options are Disable (Disable GV3) and 

Enable (Enable GV3)

. 

Содержание InfiniteStorage 3500











































































































Отзывы:

Нет отзывов