manualshive.com logo in svg

Silicon Graphics InfiniteStorage 3500, Руководство пользователя, Страница: 105 / 106

Поделиться
Скачать
Silicon Graphics InfiniteStorage 3500 Скачать руководство пользователя страница 105

007-5653-001

85

Appendix  B

B.

System Drivers

The ISS3500 server belongs to the SGI InfiniteStorage Server family. These servers may 
sometimes require driver versions that are not included in the original operating system release. 
This appendix describes how you can access such drivers via SGI, Novell, and Red Hat. The 
appendix also includes a note about using MegaRAID drivers on SGI InfiniteStorage servers.

SGI Driver Updates

SGI provides these required sytem drivers on the SGI Driver CD, which ships with all SGI 
systems, and on systems that are pre-installed in the factory.

SGI also makes the SGI Driver CD available on Supportfolio Online:

http://www.sgi.com/support/

Simply search for "Driver CD" to find the latest version of the CD.

Novell Driver Updates

Novell makes SGI driver updates available at the following location:

http://forgeftp.novell.com/sgi/

Red Hat Driver Updates

Red Hat makes driver updates for Red Hat Enterprise Linux available on the Red Hat Network 
(RHN). 

Содержание InfiniteStorage 3500











































































































Отзывы:

Нет отзывов