Viewing Statistics
63
To view statistics for a particular port, click on the port or its LED in the hub map, or click
on the entry for the port in the Status column. Figure 5-2 shows an example.
Figure 5-2
Hub Port Detailed Status Screen Example
Note:
The default settings in this screen are the recommended settings.
In this screen:
•
Summary status shows the basic status of the port, as it is also shown in the Hub
Port Status screen.
•
Configured as Enabled is checked if the port has not been administratively disabled
for use.
•
Configured as Autobypass during LIP F8 is checked if the port has been configured to
automatically bypass while it is streaming LIP F8 characters. (See “Automatic LIP F8
Word Substitution and Bypass” on page 12 in Chapter 1 for an explanation of LIP F8.)
•
Configured as AutoLIP (Originate LIP F7 on insertion) is checked if the port has
been configured to originate LIP F7 characters when it inserts into the loop. (See
“Automatic Loop Reconfiguration” on page 13 in Chapter 1 for an explanation of
LIP F7.)
You can change the settings in the three configuration check boxes; see “Bypassing
Ports” on page 66 for instructions.
