30
Chapter 3: Fibre Channel Hub Setup and Cabling
Cabling the Management Port
For a 10-Base-T Ethernet connection, insert an Ethernet cable into the port at the upper
right of the front panel; see Figure 3-3.
Figure 3-3
Cabling the Ethernet Port
Alternatively, connect the hub to an ANSI console terminal or to the serial (console) port of
a PC; see Figure 3-4. See step 1 on page 27 for serial connection requirements.
Figure 3-4
Cabling the Serial (Console) Port
Connect the other end of the cable to the ANSI console terminal or PC using the
appropriate DB-9/RJ11 adapter included with the hub.
10BaseT
Console
1
6
2
7
3
8
4
9
4
10
REAR
Ethernet port
10BaseT
Console
1
6
2
7
3
8
4
9
4
10
REAR
Console port
