38
Chapter 4: Setting Up Local or Remote Hub Management
Logging In via a Console Terminal
To log in via a console, follow these steps:
1.
Verify that the following software is installed on the system and configured
correctly:
•
eoe.sw.uucp
•
/etc/uucp/Devices
configuration file
For example, this file should contain a line like the following:
Direct ttyd2 - 9600 direct
2. In a window, enter
cu -l /dev/ttyd
X
where
X
is the port number; for example, ttyd2. (The
cu
command is “call UNIX.”)
A message appears:
Connected
3. Press Esc twice. A prompt appears:
Enter username or HELP>
4. Press the space bar and Enter. The hub prompt appears, indicating normal privilege:
Server>
5. For full access to the hub, enter
Server> su
6. At the Password prompt, enter the password. The initial (and default) password is
system.
Password> system
The characters you enter do not echo to the screen.
For information on setting passwords and on administrator privilege, see “Setting
Passwords” on page 53.
For information on logging out, see “Terminating the Connection” on page 55.
