SILENTRON SERENYA 2000 Скачать руководство пользователя страница 9

Страница: 9 / 20

COPYRIGHT SERENYA

COD. 2001

SERENYA

by Silentron

– made in Italy

The GSM module answers immediately to the incoming calls if the calling number is recognized: in this case we can decide that the telephone
number has a direct access to the control panel, without the necessity to compose the user code (look 3.8.1). If this is not foreseen, after having
listened the message, compose on the telephone the user code followed by # and procede with the possibles activations.

3.3.4) - 3.3.5) USER CALLED BY THE CONTROL PANEL

In case of alarm and phone call, the called person (after having listened to the message repeated twice and the "Beep" of "end of message")
can block the following calls cycle pressing # on his telephone and/or interact with the device composing the following commands:



ARMING/DISARMING:

press 0 # to know the control panel status: we’ll have a specific vocal answer. To fully arm the control panel press 0 * 1 #,

to only arm partitions A+B press 0 * 2 #, to disarm press 0 * 0 # (

pay attention to don’t procede with this operation in case of real intrusion):

we’ll have a vocal answer and in the GSM models an SMS confirming the performed operation too.



Local commands:

entering a number from 1 to 16, followed by * 1 # we send 1-16 radio commands for the activation of local receivers,

installed RX (exemple 12 * 1 #). Entering a number from 1 to 16, followed by * 0 # we send 1-16 radio commands for the deactivation of
local receivers, installed RX (exemple 12 * 0 #).

3.3.6) REMOTE VARIATION OF MEMORIZED TELEPHONE NUMBERS:

t’s possible to modify telephone numbers programmed in the phone book via SMS using a telephone having telephone number programmed

with direct access: compose an SMS message preceded by the letter A followed by the numbers without spaces:
A333555666 (old number to be changed) A333666888 (new number to be programmed)
The control panel stores the modification and send a confirmation SMS: CHANGE OCCURRED *333666888*

3.3.7) REMAINING SIM CREDIT

Pressing for 2 seconds the button



we automatically obtain the remaining SIM credit in vocal format (if the number is programmed - look 4.4).

3.3.8)

– 3.3.9) REMOTE LISTENING/LIVE VOICE CONVERSATION:

Wheter the control panel calls a programmed telephone number or the USER calls the control panel, during the connection to the GSM network
we can listen what happens in the environments next to the control panel (and speak in case of necessity) pressing the button « * » on the
connected phone keyboard. Pressing it again we stop the listening and we can begin to compose commands. If we don’t do anything for 60
seconds the connection falls automatically .
In the same way we can call using t

he control panel like a mobile phone: press the button ← for 2 seconds for the connection, compose a

telephone number within a minute and press



. To conclude the phone call press ESC or the button



3.3.10) OTHER FUNCTIONS OF THE CONTROL PANEL

Control units with a GSM module offer other automatic functions which can be programmed during installation:



periodic transmission of control unit operational status SMS (GSM models only)



communication of SIM expiry - it is recommended to use SIM without expiry.



SMS notification of failure and reinstatement of electrical mains power supply.

4) FOURTH PART

– CONTROL PANEL PROGRAMMING

4.1) GENERAL NOTES:

The control panel programming is very simple and is realized using control panel’s keypad. Follow the vocal

instructions and verify programming on the display. To completely understand certain programming parameters read the previous parts of this
manual. Genaral rules:



all programming must be confirmed with the



button. Without confirmation the operation is not valid.



when the display shows symbols such as





upward or downward scrolling or confirmation is possible



when the display shows the letter " Y " (yes) or " N " (no), a specific function may or may not be available.



use the ESC button to exit from a situation; use the CANC button to cancel a programming.



use the



button to cancel a part of programming while it is being written.



use the numerical buttons to link or unlink the telephone numbers to the vocal/SMS messages of any kind and select zones A, B, C.



use the numerical buttons to write the hour, date, minutes, seconds wherever required.

Programming errors

: in the case of incorrect entering the device signals the error with 1 or 3 Beeps (remote controls/detectors programming).

Programming reset

: every programming can be modified/deleted or not confirmed as above described, Otherwise it’s still programmed also in

case of power failure. The total reset can be done entering in the SETTINGS menù and confirming the "RESET."

Preparation

: it is recommended to program the control panel on the bench, keeping the various satellite devices on hand, which make up the

system, sirens excluded. Successively, the control unit and the satellites will be positioned in the suitable positions, after checking the radio
range. The various devices must therefore be prepared by opening the battery or accumulator compartment.

SIM CARD:

always program the PIN code of the SIM CARD as "1234" or "without PIN" and insert the SIM CARD in the dedicated slot (look

figures). If the SIM CARD is not in its place, the message "!SIM" will appear and obviously all the functions depending by the GSM transmitter
doesn’t work.

First activation

Programming can be realized by connecting just the battery: any connection to the mains must be done after definitive fixing of

the control panel (look electrical connections)

4.2) USER CODE

– INSTALLER CODE

30154

The firmware version of the control

panel will appear. Press



choice

the language using

↑↓