SILENTRON SERENYA 2000, Руководство пользователя

Страница: 3 / 20

COPYRIGHT SERENYA COD. 2001
SERENYA
by Silentron
– made in Italy
1) FIRST PART - CONFIGURATION OF SERENYA WIRELESS SYSTEM
The Serenya control panels makes up represent the brain of a security alarm system with home automation options made possible by the
integration of the control unit with various types of detectors or sensors, control means and dissuasion and alarm devices. The dimensional limit
is given mainly by the radio range of the devices, which can be amplified through appropriate repeaters.
The Serenya control panels can also manage relevant outdoor detectors , informing the user indoor and giving place to dissuasion signals for
the intruder but not disturbing other peoples. This because the outdoor detectors may generate improper alarms due to unavoidable natural
phenomena which interact with the equipment and do not depend on defects of the devices.
Before operating on the devices the installation project of the system to be realised must be clear because programming the control unit and
the satellites depends on the result that is to be obtained by the technical/operational choices made..
1.1) SERENYA : AVAILABLE MODELS AND THEIR APPLICATIONS
All SERENYA control panels are "speaking" since they permit to record vocal messages to inform the user, in addition to the usual vocal
messages transmitted via telephone;
these last they don’t inform the user vocally only for intrusions and troubles, but they specify the device
which generated it, simplyfing a lot interventions.
Code 2000 SERENYA GSM WIRELESS:
control panel supplied exclusively with battery for completely wireless installations, independent
from the electric network, with a very good security level and a good home automation flexibility. It has an integrated GSM telephone transmitter
(it requires a SIM card), that, for obvious reasons of consumption, is switched-on temporarily in case of events to communicate: for this reason
it isn't possible to command the control panel via telephone.
Code 2001 SERENYA MIX GSM > (this manual):
control panel supplied trought the 230V CA network using an external feeder (it needs a
rechargeable 12V 2,2Ah backup battery, not included), with the possibility to command sirens both wired and wireless. It provides a very good
security level and a good home automation flexibility thanks to the always active integrated GSM telephone transmitter (it requires a SIM card),
allowing to command the control panel via telephone and to receive events communications.
Code 2002 SERENYA PSTN MIX:
control panel similar to the model 2001, but without GSM module therefore the transmission aspects of the
alarms and reception of the radio commands they depend only by the fix telephone line (PSTN), through of which it's possible to manage the
control panel.
Code 2003 SERENYA PSTN WIRELESS: control panel similar to the model 2000, but without GSM module therefore the transmission aspects
of the alarms and reception of the radio commands they depend only by the fix telephone line (PSTN), through of which it's possible to manage
the control panel.
Code 2004 SERENYA PSTN+GSM MIX: control panel supplied trought the 230V CA network using an external feeder (it needs a rechargeable
12V 2,2Ah backup battery, not included), with the possibility to command sirens both wired and wireless. It has an integrated double telephone
transmitter, one for fix line (PSTN), one GSM (it requires a SIM card) for the events transmission and commands reception via one of the two
communication systems.
1.2) ARMING/DISARMING DEVICES
– it’s possible to program up to 10 key-fobs and an unlimited number of keypads (look Warning )
SERENYA control panels can be commanded trought the on-board keypad, or trought bidirectional key-fobs (Code 2023) and/or trought
bidirectional keypads (Code 2028) qui confirment les opérations effectuées:. Soit les télécommandes que les claviers disposent de touches
fonction pour activer alarmes PANIQUE et AGGRESSION.
1.3) ALARM DEVICES
– it’s possible to program an unlimited number of alarm devices (look Warning)
The telephone alarm transmission as well as the siren integrated in the control cannot be considered sufficiently dissuasive at the local level.
We suggest to complete the system using optical and acustical alarm devices to create bewilderment in the intruder as the external wireless
siren Code 2032 (alarm type: voice, flash and sound) or the wired external siren Code 2039 (alarm type: flash and sound), as well as the
internal sirens Code 2034 and 2035.
1.4) DETECTORS
– It’s possible to program up to 50 detectors (look Warning)
A complete range of wireless detectors is available: Code 2018 and 2021 for the internal volumetric protection, Code 2016 for doors/windows
protection, Code 2020 for rolling shutters protection and Code 2014 for the protection of the external areas of the building. The choice of the
correct detectors it's a compromise bound to the local structures and the objectives we want to get by the electronic protection. Attention: more
a detector is "sensitive", more are the possibilities to have improper alarms.
SERENYA control panels can also manage fire,
flooding, gas flight (available on demand) and other detectors, therefore they permit a complete
protection against dangers.
1.5) ACCESSOIRES
– on peut programmer illimités interrupteur sans fils, sur 16 commandements différents
Operating in wireless conditions it is simple to complete an alarm installation with useful home automations, which can be controlled on
site or at a distance via telephone. Switching on lights on passage, controlling shutters, blinds, motorised gates, inserting central hating and air
conditioning are only a few of the operations that the SERENYA control panels make possible trought small wireless switches Code 2041 and
2042.
1.6) BATTERIES
– LIFE TIME
Batteries used in the SERENYA system are cheap and simple to find on the market, for the USER's biggest serenity. The declared life time of
the different devices are unfortunately variable depending by their use and by their number in the context of the system: solicitations repeated
and continuous of detectors gives as result more consumption; a greater number of system components and a lot of Arming/Disarming per day
they increase the consumption of the control panels and sirens supplied by battery: these phenomena obliges a more frequent replacement of
the batteries. The rechargeable batteries also consume their power, and they must be replaced at least every 4 years.
Warning: bidirectional keypads and sirens can transmit their own Tamper alarm to the control panel. In order to allow their Tamper
control they’ve to be programmed also as a detector (look at the specific instructions), so each one takes one of the 50 available
locations for detectors, reducing their possible number. Every manual command PANIC and HOLD-UP programmed trought the key-
fobs takes a location too.
It’s important to consider these aspects realizing the system
.
1.7) GLOSSARY
ALARM (various types)
There are various types of alarm, which give different consequences. The "intruder" alarm dissuades and warns
from
outdoors. The “panic” alarm supposes that the user wants to draw attention by activating the sirens, while the