Silent Gliss Move страница 7 Скачать руководство пользователя

Страница: 7 / 43

7 | EN

• operation of the appliance outside of the areas described

in the technical data.

Safety

This appliance is not intended for use by persons (including

children) with restricted physical, sensory or mental capaci-

ties or by such persons as possess insufficient experience

and/or knowledge for its use, unless in cases in which they

are supervised by a person responsible for safety or have

received instruction in the correct use of the appliance.
• Never allow children to operate electrical appliances

unsupervised.

2.1 General safety instructions

These operating instructions contain all safety instructions

needed to avoid or prevent risks when handling the appli-

ance in connection with the drives and components it con-

trols. Safe operation of the appliance is assured, provided

all safety instructions listed herein are observed.

2.2 Requirements for staff

• Each person charged with operating the appliance must

have read the entire operating instructions, and must

have understood the consequent risks, before com-

mencing work with the appliance.

2.3 Safety instructions for operation

• Please check the housing and the wiring for damage

before using the appliance for the first time, and repeat

these checks on a regular basis thereafter. Never use a

damaged appliance.

Содержание Move












































Результаты поиска

Содержание Move

Отзывы:

Похожие инструкции для Move

Бренды по названию

Популярные бренды

Silent Gliss Move, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание Move

Отзывы:

Похожие инструкции для Move

Бренды по названию

Популярные бренды