Silent Gliss Move, Оригинальная инструкция по эксплуатации, Страница: 18 / 43

18 | EN
‰
In this case the Move Transmitter Stick must be briefly
disconnected from the Move Server once the configura -
tion process is complete and then reconnected in order
to transmit the latest configured data to the Move Server.
The Move Transmitter Stick inserted in the Move Server can
then be used to operate the radio receiver.
3.8.1 Programming the intermediate position 1 in the
receiver
Requirements:
The transmitter, i.e. the channel, has been configured. The
end positions of the drive unit are defined. The shutters/
blinds are located in their upper end position.
1. Use the
CLOSE button to move the shutters/blinds to
just above your preferred position.
2. During this movement, keep the button CLOSE de-
pressed and briefly (simultaneously) press the button
STOP/P . The shutters/blinds stop. The status display
lights up briefly.
The intermediate position 1 is now programmed.
Programming the intermediate position 2
Requirements:
The transmitter, i.e. the channel, has been configured. The
end positions of the drive unit are defined. The shutters/
blinds are located in their lower end position.
1. Use the
OPEN button to move the shutters/blinds to just
above your preferred position.
2. Then simultaneously press the STOP/P button. The
shutters/blinds stop. The status display lights up briefly.
The intermediate position 2 is programmed.