Siko MSA510/1, Руководство по установке

Страница: 37 / 44

MSA510/1
List of commands / service mode English
MSA510/1 · Date 04.05.2016 · Art. No. 83520 · Mod. status 38/16
37
Command Length Reply Description
dxyklmn 7/2 ">" write EEPROM cell Hex-ASCII; xy 00 ...
63 dec, klmn = Hex-ASCII
ey 2/10 "+xxxxxxx>" Issue parameter
y = address (0 ... 3)
x = decimal value
y = 0: position value
y = 1: zero position value
y = 2: calibration value
y = 3: boundary
fy+xxxxxxx 10/2 ">" Enter parameter
y = address (1 ... 3)
x = decimal value
(±0 ... 9999999)
y = 1: zero position value (default = 0)
y = 2: calibration value (default = 0)
y = 3: boundary (default = 0)
g 1/9 "0/ 10>" read out resolution
here: 10 mm
hx 2/2 ">" write resolution (non-volatile):
x = 0: 10 mm
x = 1: 1 mm
x = 2: 0.1 mm
x = 3: 0.01 mm
x = 4: 1 i
x = 5: 0.1 i
x = 6: 0.01 i
x = 7: 0.001 i
i 1/8 "Adr.23>" send SIKONETZ3-address (default 01)
jxy 3/2 ">" hand over SIKONETZ3-address (2-digit, e.
g. 03)
k 1/- " " Software reset
l 1/2 ">" Initiate zero-setting
nx 2/2 ">" write output code
0 = Gray
1 = binary
p 1/4 "0x>" device status (for internal purposes)
q 1/8 "004800" Read out baud rate
r 1/2 ">" start alignment (only for use in our fac-
tory!)