EC mAV 2
Battery replacement and power-on/off EC mAV 2
Technical changes reserved
- 31 -
4
Battery replacement and power-on/off EC mAV 2
When the
symbol appears on the display, the batteries need to be replaced. This device
is powered by two AA batteries (LR6).
CAUTION! Electric current!
To avoid electrical shock or personal injury:
Remove any test leads from the device before opening the battery compartment.
Close and latch the battery cover before using the device.
CAUTION! Observe the battery type and polarity!
Damage can be caused if a different type of batteries is used or the batteries are incor-
rectly inserted during replacement.
Use only fresh batteries of the same type (LR6 - AA).
Pay attention to the correct polarity when inserting.
Comply with the following instructions when replacing the batteries (see figure 4-1):
Switch off the device.
Remove any test leads from the
terminals.
Take off the protector of the device.
Open the battery cover:
Remove the screws from the battery
door.
Take off the battery case.
Remove the old batteries.
No domestic waste!
The batteries must be disposed of.
Insert two new batteries.
!!! Pay attention to the POLARITY !!!
Reinstall the battery case and tight-
en the screws.
Figure 4-1
