Device description
EC mAV 2
- 28 -
© SIKA
•
Ba_ECmAV2
•
03/2015
1
Device description
The EC mAV 2 is a hand-held monofunction simulator which is intended for calibration and
maintenance and can be used either on site or in the laboratory. It can measure direct cur-
rent and DC voltage as well as generate direct current. Furthermore, it offers the function to
generate linear steps and ramps.
The implemented sensor functions simulate specific supply variables and display an exact
given value. This distinguishes a signal calibrator from the conventional measuring functions
of a multimeter.
Scope of delivery and accessories:
Before using the device, check the delivered items:
1x EC mAV 2.
1x Operating manual.
A set of CF-36 industrial test lead (with alligator clips attached to probes).
Packaging or transport protection (if applicable).
1.1
Intended use
The monofunction simulator type EC mAV 2 may only be used for measuring direct current
and DC voltage and for generating direct current.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits (
§ 9 "Technical data") may under no circumstances be exceeded.
This applies especially to the compliance with the permissible voltage applied to the termi-
nals.
1.2
Exclusion of liability
We accept no liability for any damage or malfunctions resulting from incorrect installation,
in-appropriate use of the device or failure to follow the instructions in this operating manual.
