SIIG Cyber 1S1P PCI, Быстрое руководство по установке

Страница: 9 / 12

9
Windows 2000/XP/Server 2003/Vista
1. From the Device Manager window double click
Ports (COM & LPT) , then double click CyberSerial
PCI... serial port.
2. Click Settings tab and click Advanced... .
3. At the COM Port number box, click the down arrow
and select a COM port that is not in use. Click OK .
4. Click OK , then close Device Manager to save the
changes.
Changing Parallel Port Address (LPT)
Some parallel devices need a specific parallel port in
order to work. If your parallel device works properly, do
not change this setting.
Windows 95/98/98SE/ME
1. From the Device Manager window double click
Ports (COM & LPT) , then double click CyberParallel
PCI .
2. Click Settings tab, check Enable use of I/O location
278h .
3. Click OK , click OK again to close Device Manager ,
and click Yes to restart Windows to save the changes.
Windows 2000/XP/Server 2003/Vista
1. From the Device Manager window double click
Ports (COM & LPT) , then double click CyberParallel
PCI... .
2. Click Port Settings tab.
3. At the LPT Port Number box, click the down arrow
and select an LPT port that is not in use.
4. Click OK , then close Device Manager to save the
changes.