SIIG Cyber 1S1P PCI, Быстрое руководство по установке

Страница: 8 / 12

8
Windows Vista
™
1. At the Found New Hardware window, insert the
driver CD, click Locate and install driver software
(recommended) , then click Continue .
2. Click Next , then click Close .
3. Repeat step #2 to complete the driver installation.
Note : Windows Vista driver installation process
may take several minutes to complete.
To Verify Windows Vista Installation
1. Right click Computer , click Manage , click Continue ,
then click Device Manager .
2. Click on the + (plus sign) in front of Ports (COM &
LPT) , CyberSerial PCI 16Cxxx... and CyberParallel
PCI... should be displayed.
3. Double click Multifunction adapters , SIIG
CyberPro 1S1P PCI board should be displayed.
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
Windows 95/98/98SE/ME
1. From the Device Manager window double click
Ports (COM & LPT) , then double click CyberSerial
PCI... serial port.
2. Click Settings tab, at the Port Name box click the
down arrow and select a COM address that is not
currently in use.
3. Click OK , click OK again to close Device Manager
to save the changes.