SIIG CE-H26F11-S1, Руководство пользователя, Страница: 5 / 32

5
5. PANEL DESCRIPTIONS
Front Panel
1. Input status light: the selected source has green light
2. Source: Short press to select source from Type-C
→
VGA
→
DP
→
HDMI Input
3. Up: Long press to choose device setting in the OSD menu
4. Down: Long press to choose device setting in the OSD menu
5. Menu/Left: Long Press to return to the main menu, short press to back to previous menu
6. Enter/Right: Short press to enter the sub-menu, if there is no sub menu, short press it to
confirm the setting selection
7. Firmware port: Use USB cable to upgrade firmware
8. IR: Receive the IR signal from the remote controller to control the device
9.
Power: Turn on or turn off the power
Note: 1. Long press "Up" and "Down" together for 5 seconds can modify the
output format, the current input status indicator flashes at a frequency of 5Hz, and
then cyclically switches at 1.5S intervals. The four indicators correspond to a
resolution of 4k30-1080p-720p-auto.
2. Long press "Menu" and "Enter" together for 5 seconds, the input status lights
starts blinking, after the blinking is over, the device is reset successfully.
Rear Panel
1. DC24V2A input
2. Type-C input port
3. VGA input port
4. Audio input port for VGA source
5. DP input port
6. HDMI input port
7. HDMI loop output
8. S/PDIF output port
9. Analog Stereo output port
10. RS232 port
11. TCP/IP port
12. HDMI output1 to HDMI output9 ports