SIIG CE-H26F11-S1, Руководство пользователя, Страница: 23 / 32

23
Operating instructions
Take the default IP address login as an example:
(1) IP configuration: IP configuration is required, whether using single device control
or LAN multi-device control.
(2) After configuration, pls enter the default IP address into the browser, enter the
web end login interface, enter account number: admin, password: admin click on
the "Log in" of the yellow bar below the account, as shown in the figure;
7.5.2 Video wall setting
Note: This interface is used to set up video walls or cascade.
Interface introduction:
(1) Video Map column: to identify the location of the output port mapping, you can
change the output port position through the drop-down menu. The position of
Map1 to Map9 in the same cascading layer is stable no matter how the output
ports arrayed, the rule for "Port Map" is from left to right, from top to bottom as
showed in the below picture.
(2) Output column: screens in horizontal and vertical directions, plus the parameters
of the equipment cascade layers.
(3) Input column: source selection for the video wall. (Type-C, VGA, DP, HDMI).
(4) Default 3x3 video wall, the device can also realize 4x3 5x4 5x5 6x6 7x7 8x8 and
max 10x10 video walls through cascade.
(5) The max screen amount in the horizontal direction is 10pcs.
(6) The max screen amount in the vertical direction is 10pcs.
(7) The max cascade layer amount is 12 layers.
(8) Note: The parameters can be set up by clicking the "+ " or "-" button in the
Output column. The Input column. When one of the Input key is blue, it indicates
that the related input signal is successfully connected.