SIIG CE-H26F11-S1, Руководство пользователя

Страница: 24 / 32

24
Operating instructions
Eg1
：
Select DP port as input source to make a 3x3 video wall by 1pcs device.
(1) In the Output section, select both the "Horizon" and "Vertical" as number 3, and
the "Equipment Cascade " as number 1(There is only one device. The cascade
position must be 1, otherwise the setting is invalid).
(2) Then select "DP" in the Input section and click "apply".
(3) Click the Video Map column and set the output ports according to TV 1 ~ 9. For
Example: In the Video Map column, click and select the output ports as following
picture: Out-1:Map5; Out-2:Map4, Out-3:Map3; Out-4:Map8, Out-5: Map7;
Out-6: Map2; Out-7: Map9; Out-8 Map1; Out-9: Map6.
Note: 1. Screens under the same cascade layer can be connected to any output port in
this layer.
2. The position of Map1 to Map9 is fixed as the example, while there are no
limitations for the HDMI output ports order, the corresponding output port can be
seen in the OSD.
Eg2
：
Select HDMI port as input source to make a 4x3 video wall by 2 devices.
Operation Steps of device1:
(1) In the Output section of the first device, select the "Horizon" as number 4,
"Vertical" as number 3, and the "Equipment Cascade " as number
1,
which stands
for the device is in the first cascading layer.
(2) Then select "HDMI" in the Input section and click "apply".
Operation Steps of device2:
(3) In the Output section of the second device, select the "Horizon" as number 4,
"Vertical" as number 3, and the "Equipment Cascade " as number 2, which stands
for the device is in the second cascading layer.
(4) Select the input port as the HDMI Loop out of the device1, then click "apply".