SIGRIST LabScat 2, Инструкция по эксплуатации

Страница: 15 / 60

General safety points Instruction Manual LabScat 2
12112E/2 15
CAUTION!
Penetration of moisture as well as condensation on the electrical components dur-
ing operation.
If moisture enters the instrument, the LabScat 2 can be damaged.

The USB interface cover must always be attached during operation.

If the instrument is operated with a water temperature which is lower than the ambient
temperature, the instrument must remain switched on.
CAUTION!
Penetration of moisture as well as condensation on the electrical components dur-
ing servicing duty.
If moisture enters the instrument, the LabScat 2 can be damaged.

Work on the inside of the instrument may be performed only in a dry room and at room
temperature. The instrument should be at operating or room temperature (avoid con-
densation on optical and electrical surfaces).
CAUTION!
The use of aggressive chemicals when cleaning.
Use of aggressive chemicals can cause damage to instrument components.

Do not use aggressive chemicals or cleaning agents when cleaning.

Should the instrument come in contact with aggressive chemicals, clean it thoroughly
with a neutral cleaning agent.
WARNING!
Unpleasant odors in the water bath
Stagnant water or residual moisture in the water bath can lead to unpleasant odors.

Empty and clean the water bath after every use.

Do not close the cover on the water bath when not in operation.