SignWarehouse.com Bobcat BA-60, Руководство пользователя

Страница: 22 / 26

6.2.2 Error Indicators
If some mechanical problems occur during the operation, the ERROR LED will turn on.
Please follow the instructions below to solve the problem. If the cutting plotter still cannot
work, please contact your local dealer and tell him or her about the error indicator.
Error 1 and 2
Please contact your local dealer to replace SRAM or DRAM.
Error 3 Check the media, drum or X-motor (Drum driven motor)
This message indicates that there might be a problem on the X-axis. Please check that
the drums are working normally and see that the media is well loaded. Then turn on the
power and reboot the cutting plotter.
Error 4 Check media, or Y motor (carriage driven motor)
This message indicates that there might be an obstruction to the carriage relating to a
problem on the Y-axis. Please clear the obstruction and check that the carriage can move
smoothly. Then turn on the power and reboot the cutting plotter.
6-3
Note:
In order to identify the warning messages easily, please stick the warning sticker (in
accessory box) on the side cover of your cutting plotter.