SignWarehouse.com Bobcat BA-60, Руководство пользователя

Страница: 15 / 26

3-9
3.8 Repeat Key
You can cut your last cutting job at the same position by pressing REPEAT key without
setting a new origin.
** Procedures to repeat a cutting job at different positions:
1. After the cutting job is finished, use the
ARROW
keys to move the tool
carriage. Move the carriage to your desired position, and then press the
ORIGIN SET
key. The
ORIGIN SET LED
lights, and the new origin point settles down.
2. Press the
REPEAT
key to repeat the cutting job, and the
REPEAT LED
lights.
3.9 Data Clear Key
The purpose of the DATA CLEAR key is to clear the data in the buffer memory. The
DATA CLEAR key can only works under the pause or off-line condition. The DATA
CLEAR LED lights during under the condition.
3.10 Origin Setting
Use the ORIGIN SET key to set a new origin at any position in the cutting area where the
tool carriage starts to work. Please note that the new origin setting must be made under
the off-line condition.
** Procedures:
1. After loading the media and lowering down the lever, use the ARROW keys to
move the carriage to the desired location to set a new origin.
2. Press the ORIGIN SET key and the ORIGIN SET LED lights.