manualshive.com logo in svg

Signature Kitchen Suite SKSCW181RP, Руководство по обслуживанию, Страница: 53 / 82

Поделиться
Скачать
Signature Kitchen Suite SKSCW181RP Скачать руководство пользователя страница 53

 - 53 -

Copyright © 2018-2019 SIGNATURE KITCHEN SUITE.
All rights reserved. Only training and service purposes.

6. How to Sliding out Machinery room ( 4 / 4 )
Guide Fan Assembly SVC With Condenser. 

- SVC part : Guide Fan , Fan Assembly, Motor DC, Condenser 

Refer to Exploded view in Guide Fan Assembly.

1)  Condenser 

- Disassemble the Condenser. There is no Screw in Condenser. 
- Move to Condenser beside  to  disassemble. Refer to Sliding out Machinery Room page. 

2)  Motor DC, Fan Assembly 

- Disassemble the Guide fan Assembly from the Refrigerator. 
- Loosen the Screw Customized 4 points. 
- If Need to SVC Fan Assembly, Just  pull out the Fan and Change the part. 
- If Need to SVC Motor DC, Loosen the Screw Tapping from Guide Fan and Change.

3)  Disassemble the Guide fan Assembly from the Refrigerator. 

- Reassemble in reverse order of disassembly. 
- Do not miss the Damper Rubber Located on Screw Customized. 

Brazing point

Содержание SKSCW181RP



















































































Отзывы:

Нет отзывов