background image

4

1.800.221.3379

S O L I D   S U R FA C E   T U B   W I T H   I N T E G R A L   D R A I N

BAÑERA DE SUPERFICIE SÓLIDA CON DRENAJE INTEGRADO

SKU: 948319 | 948320 | 948699 | 948700

8.  Finish your installation by running a bead of neutral

cure silicone sealant around the base of the tub where 

it meets the floor. Wipe away any excess sealant with a 

damp cloth.

8. Termine su instalación aplicando un reborde de 

sellador silicona de curado neutro alrededor de la base de 

la bañera, donde se junta con el piso. Limpie el exceso de 

sellador con un trapo húmedo.

6. Cut the appropriate amount of the 1 1/2” PVC to 

ensure a proper connection into the P-trap under the 

floor. Use the PVC primer and cement to secure the 

installation to the P-trap.  

6. Corte la cantidad apropiada del PVC de 1 1/2” PVC 

para garantizar una conexión adecuada en el sifón de 

desagüe debajo del suelo. Utilice la pintura base y 

cemento del PVC para fijar la instalación al sifón de 

desagüe.

7.   Fill the tub with water to check for any leaks from 

the connections. Verify that the drain is working 

properly.

7. Llene la bañera con agua para verificar si existen fugas 

en las conexiones. Verifique que el drenaje funcione 

correctamente.

p-trap 

pvc hub  

dapter fi

tting  

sifón de 
desagüe

accesorio de 
adaptador 
de PVC

  

Содержание Doric 948319













Отзывы: