SignaMax 065-7840, Руководство пользователя

Страница: 76 / 228

Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
66
Default SNMP function: Enable
Default community name for GET: public
Default community name for SET: private
Default community name for Trap: public
Default Set function: Enable
Default trap host IP address: 0.0.0.0
Default port number: 162
Trap:
In the switch, there are four trap hosts supported. Each of them has its
own community name and IP address, and is user-definable. To set up a
trap host means to create a trap manager by assigning an IP address to
host the trap message. In other words, the trap host is a network
management unit with the SNMP manager receiving the trap message
from the managed switch with the switch’s SNMP agent issuing the trap
message. 6 trap hosts can prevent losing the important trap message
from the switch.
For each public trap, the switch supports the trap event Cold Start, Warm
Start, Link Down, Link Up and Authentication Failure Trap. They can be
enabled or disabled individually. When enabled, the corresponded trap
will actively send a trap message to the trap host when a trap occurs. If
all public traps are disabled, no public trap message will be sent. As to
the Enterprise (no. 6) trap, it is classified as a private trap, which are
listed in the Trap Alarm Configuration function folder.
Default for all public traps: Enable.
Fig. 3-21 Community and trap host setting