SignaMax 065-7840, Руководство пользователя

Страница: 98 / 228

Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
88
Function name:
GVRP Config
Function description:
GVRP Config is used to configure each port’s GVRP operation mode, in which
there are seven parameters requiring configuration as described below.
Parameter description:
GVRP State Setting:
This function allows enabling or disabling of the GVRP function. To do
this, pull down the list and click the
<Downward> arrow key to choose
“Enable” or “Disable”, then click the <Apply> button; the new GVRP
state will take effect immediately.
Join Time:
Used to declare the Join Time in units of centiseconds. Valid time range:
20 –100 centiseconds. Default: 20 centiseconds.
Leave Time:
Used to declare the Leave Time in units of centiseconds. Valid time
range: 60 –300 centiseconds. Default: 60 centiseconds.
Leave All Time:
A time period for announcement that all registered device is going to be
de-registered. If someone still issues a new join, then a registration will
be kept in the switch. Valid range: 1000-5000 unit time. Default: 1000 unit
time.
Default Applicant Mode:
This mode refers to the type of participant. There are two modes, normal
participant and non-participant, that can be selected by the user.
Normal:
The participant is a Normal Participant. In this mode, the
switch participates normally in GARP protocol exchanges. The
default setting is Normal.
Non-Participant:
The participant is a Non-Participant. In this mode, the switch
does not send or reply to any GARP messages. It listens to
messages and only reacts to the received GVRP BPDU.
Default Registrar Mode:
This mode refers to the type of Registrar. There are three types of
parameters for registrar administrative control value: normal registrar,
fixed registrar, and forbidden registrar, that can be selected by the user.