background image

 

Appendix A

 

Troubleshooting 

This Appendix covers the most likely problems and their solutions. 

Overview 

This chapter covers some common problems that may be encountered while using 
the Wireless Router and some possible solutions to them. If you follow the suggested 
steps and the Wireless Router still does not function properly, contact your dealer for 
further advice. 

General Problems 

Problem 1: 

Can't connect to the Wireless Router to configure it. 

Solution 1: 

Check the following: 

• 

The Wireless Router is properly installed, LAN connections are 
OK, and it is powered ON. 

• 

Ensure that your PC and the Wireless Router are on the same 
network segment. (If you don't have a router, this must be the 
case.)  

• 

If your PC is set to "Obtain an IP Address automatically" (DHCP 
client), restart it. 

• 

If your PC uses a Fixed (Static) IP address, ensure that it is using 
an IP Address within the range 192.168.0.2 to 192.168.0.254 and 
thus compatible with the Wireless Router's default IP Address of 
192.168.0.1.  
Also, the Network Mask should be set to 255.255.255.0 to match 
the Wireless Router. 
In Windows, you can check these settings by using 

Control 

Panel-Network

 to check the 

Properties

 for the TCP/IP protocol.  

Internet Access 

Problem 1:

 

When I enter a URL or IP address I get a time out error. 

Solution 1:

 

A number of things could be causing this. Try the following trouble-
shooting steps. 

• 

Check if other PCs work. If they do, ensure that your PCs IP 
settings are correct. If using a Fixed (Static) IP Address, check 
the Network Mask, Default gateway and DNS as well as the IP 
Address. 

• 

If the PCs are configured correctly, but still not working, check 
the Wireless Router. Ensure that it is connected and ON. Con-
nect to it and check its settings. (If you can't connect to it, check 
the LAN and power connections.) 

           

 SIGNAMAX LLC • 

www.signamax.eu

    95 

Содержание 065-1789











































































































Отзывы: