manualshive.com logo in svg

SIGNALCORE SC5305A, Руководство по эксплуатации и программированию, Страница: 66 / 67

Поделиться
Скачать
SIGNALCORE SC5305A Скачать руководство пользователя страница 66

 

SC5305A Operating & Programming Manual 

63 

 

General Specifications 

Environmental 

 

Operating temperature 

(33)

 ................................................................................................................  0 °C to +40 °C 

 

Storage temperature 

(34)

  ................................................................................................................  -40 °C to +70 °C

 

Operating relative humidity 

(35)

  ...................................................................... 10% to 90%, non-condensing

 

Storage relative humidity 

(35)

  .............................................................................  5% to 90%, non-condensing

 

Operating shock 

(36)

  ................................................................................  30 g, half-sine pulse, 11 ms duration 

 

Storage shock 

(36)

  ....................................................................................  50 g, half-sine pulse, 11 ms duration

 

Operating vibration 

(37)

 .................................................................................................. 5 Hz to 500 Hz, 0.31 g

rms

 

Storage vibration 

(37)

  ...................................................................................................... 5 Hz to 500 Hz, 2.46 g

rms

 

Altitude  ..............................  2,000 m maximum (maintaining 25 °C maximum ambient temperature) 

Physical 

 

Dimensions (W x H x D, max envelope) ..................................................................................  1.6” x 5.2” x 8.4” 

 

PXIe/cPCIe form factor  ...............................................................................................................................  3U, 2-slot 

 

Weight  ......................................................................................................................................................................  2.1 lbs

 

Power consumption  ..............................................................................................................................  12 V @ 2.1 A 

 

 

3.3 V @ 0.2 A 

 

Communication interface  ..............................................................................................................  PXIe (PCIe bus)

Safety 

 .............................................................................................................  Designed to meet the requirements of:

 

IEC 61010-1, EN 61010-1, UL 61010-1, CSA 61010-1

 

Electromagnetic compatibility (EMC) 

 ......................................... 

 

Designed to meet the requirements of: 

EN  61326-1  (IEC  61326-1):  Class  A  emissions;  Basic  immunity  1,  EN  55011  (CISPR  11) 
Group 1, Class A emissions, AS/NZS CISPR 11: Group 1, Class A emissions, FCC 47 CFR Part 
15B: Class A emissions, ICES-001: Class A emissions 

CE

  .............................................................................................................................................  Meets the requirements of: 

2014/35/EU;  Low-Voltage  Directive  (safety),  2014/30/EU;  Electromagnetic  Compatibility 
Directive (EMC Directive) 

Warranty

  ....................................................  1 year parts and labor on defects in materials or workmanship 

(33)  Meets  requirements  of  IEC-60068-2-1  and  IEC-60068-2-2.  Operating  temperature  may  be 

extended to +55 °C with appropriate user-provided cooling solution.  Contact SignalCore for 
recommended minimum airflow rates. 

(34)  Meets requirements of IEC-60068-2-1 and IEC-60068-2-2. 
(35)  Meets requirements of IEC-60068-2-56 and MIL-PRF-28800F, Class 3. 
(36)  Meets requirements of IEC-60068-2-27 and MIL-PRF-28800F, Class 3. 
(37)  Meets requirements of IEC-60068-2-64 and MIL-PRF-28800F, Class 3. 

Содержание SC5305A




































































Отзывы:

Нет отзывов