SC5305A Operating & Programming Manual
Rev 2.1.0
2
Copyright & Trademarks
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic
or mechanical, including photocopying, recording, storing in an information retrieval system, or
translating, in whole or in part, without the prior written consent of SignalCore, Incorporated.
SignalCore, Incorporated respects the intellectual property rights of others, and we ask those who use
our products to do the same. Our products are protected by copyright and other intellectual property
laws. Use of SignalCore products is restricted to applications that do not infringe on the intellectual
property rights of others.
“SignalCore”, “signalcore.com”, and the phrase “preserving signal integrity” are registered trademarks
of SignalCore, Incorporated. Other product and company names mentioned herein are trademarks or
trade names of their respective companies.
International Materials Declarations
SignalCore, Incorporated uses a fully RoHS (Restriction of Hazardous Substances) compliant
manufacturing process for our products. Therefore, SignalCore hereby declares that its products do not
contain restricted materials as defined by European Union Directive 2011/65/EU (EU RoHS) in any
amounts higher than limits stated in the directive. This statement is based on the assumption of reliable
information and data provided by our component suppliers and may not have been independently
verified through other means. For products sold into China, we also comply with the “Administrative
Measure on the Control of Pollution Caused by Electronic Information Products” (China RoHS). In the
current stage of this legislation, the content of six hazardous materials must be explicitly declared. Each
of those materials, and the categorical amount present in our products, are shown below:
組成名稱
Model Name
鉛
Lead
(Pb)
汞
Mercury (Hg)
镉
Cadmium
(Cd)
六价铬
Hexavalent
Chromium
(Cr(VI))
多溴联苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
SC5305A
A
indicates that the hazardous substance contained in all of the homogeneous materials for this
product is below the limit requirement in SJ/T11363-2006. An X indicates that the particular hazardous
substance contained in at least one of the homogeneous materials used for this product is above the
limit requirement in SJ/T11363-2006.
CE European Union EMC & Safety Compliance Declaration
The European Conformity (CE) marking is affixed to products with input of 50 - 1,000 VAC or 75 - 1,500
VDC and/or for products which may cause or be affected by electromagnetic disturbance. The CE
marking symbolizes conformity of the product with the applicable requirements. CE compliance is a
manufacturer’s self-declaration allowing products to circulate freely within the European Union (EU).
SignalCore products meet the essential requirements of Directives 2014/30/EU (EMC) and 2014/35/EU
