S-DIAS SAFETY CPU-MODULE
SCP 111-2
08.09.2022
Page 25
Executed
Command
Command Function
Status after Command
Execution
QUIT_ERROR
A possible error is canceled in the Safety CPU
and all safety modules required by the Safety
CPU and the error status is ended.
SW-RESET *
)
CLR_CFG
The configuration in the Safety CPU is deleted.
After executing the command, the Safety CPU is
now in service mode.
Service Mode
SET_VERIFIED
The configuration status is set to "verified".
Operational Mode
*)
A SW-RESET is performed. If the error still exists, the Safety CPU remains in the error mode. Otherwise, the
Safety CPU starts correctly.
General note:
If a command was entered incorrectly, the Safety CPU initiates the error sequence (see above).
After ending the Error sequence, the command can be reentered.
