S-DIAS SAFETY CPU-MODULE
SCP 111-2
08.09.2022
Page 7
1.3
General Requirements
Technical
Documentation
This technical documentation is a component of this product.
•
This document must be accessible near the machine
since it contains important instructions.
•
The technical documentation should be included in the
sale, rental or transfer of the product.
Acceptance of Safety
Guidelines
Before handling the product to which this documentation
belongs, the operating instructions and safety guidelines must be
read. SIGMATEK GmbH & Co KG accepts no liability for
damages resulting from non-compliance with the Safety
guidelines or the applicable regulations.
Acceptance of the safety guidelines and the explanations in this
document, as well as the Safety System handbook, are a basic
requirement for proper use. Therefore, read this operating
manual thoroughly and familiarize yourself with each of them in
detail.
More information on standards and regulations etc. can be found
in the system handbook.
Qualified Personnel
Installation, assembly, programming and initial start-up,
operation, maintenance and decommissioning of control and
automation technology products in general, as well as Safety-
related products in particular, can only be performed by qualified
personnel.
Qualified personnel in this context are people who have
completed training or have trained under the supervision of
qualified personnel and have been authorized to operate and
maintain safety-related equipment, systems and facilities in
compliance with the strict guidelines and standards of safety
technology.
