SIGMATEK ETV 0853-3, Руководство пользователя

Страница: 27 / 38

CONTROL PANEL ETV 0853-3
12.04.2017 Page 27
67
REALTIME RUNTIME
The total duration of all real-time objects
exceeds the maximum time; the time
cannot be configured.
2 ms for 386 CPUs
1 ms for all other CPUs
Solution:
-
Optimize the application's
realtime task (RtWork).
-
Reduce the clock time for the
realtime task of all objects.
-
Correct application errors
-
CPU is overloaded in realtime =>
use a higher capacity CPU.
68
BACKGROUND
RUNTIME
The total duration of all background
objects exceeds the maximum time; the
time can be configured using 2 system
variables:
-BTRuntime: time remaining
-SWBTRuntime: pre-selected value for
the runtime counter
Solution:
-
Optimize the application's back-
ground task (background)
-
Use higher capacity CPU
-
Set SWBTRuntime correctly.
70
C-DIAS ERROR
An error occurred in connection with a C-
DIAS module. Cause:
-
The reason for this error is
documented in the log file
Solution:
-
Depends on the cause
72
S-DIAS ERROR
A connection error with a S-DIAS module
has occurred. Possible causes:
- real network does not match the
project
-
S-DIAS client is defective
Solution:
- analyze logfile
95
USER DEFINED 0
User-definable code.
96
USER DEFINED 1
User-definable code.
97
USER DEFINED 2
User-definable code.
98
USER DEFINED 3
User-definable code.
99
USER DEFINED 4
User-definable code.
100
C_INIT
Initialization start; the configuration is
run.
101
C_RUNRAM
The LASAL project was successfully
started from RAM.
102
C_RUNROM
The LASAL project was successfully
started from ROM.
103
C_RUNTIME
b