SIGMATEK BWH, Конфигурация

Страница: 49 / 67

CONFIGURATION HGW-BWH
8.2.2 Connecting via USB
To create a connection to the device through a USB interface, perform the following steps in
LASAL CLASS 2:
1. Open LASAL CLASS 2.
2. In the menu tab select the item “tools” -> “Advanced Debug Tools” and open the item
“Diagnosis Tool...”
3. In the “Plc Diagnosis” window that opens, select the item “Change Online Settings”
(see Icon )
4. A configuration window then opens:
5. With the “New” button, create a new
connection and assign it a unique
name.
6. Ensure that the “Connection Type” is
set to RS232.
7. Select the COM port of device to
configure. Alternatively, you can also
use the “SERIAL Finder” tool.
8. Close the window with the “OK”
button”
9. After successfully setting the connection parameters, the new connection is already
selected in the selection list (marked in blue) shown in the “Plc Diagnosis” window. If
not, you can then select it.
10. The Link button (marked red) can now be used to create a connection to the device. If
the connection is successfully created, the display of the switching element changes.
17.05.2022 Page 47