SIGMATEK BWH, Конфигурация

Страница: 47 / 67

CONFIGURATION HGW-BWH
Afterwards, the regular password input opened. The text above the input mask changes from
“PIN” to “Network Encryption key”.
8.1.2 Connecting via Ethernet
If your device has an Ethernet connection, it can also be connected via this interface.
The default settings can be found in 7 Factory Settings. Here, the Ethernet cable must be
connected through a switch or directly to your PC/Laptop.
INFORMATION
When connecting through a switch, ensure that other connected
participants are not using an identical IP address. This can otherwise lead
to an address conflict and no connection will be made.
8.1.3 Connecting via USB
Connect an appropriate USB cable with the control and your computer.
SIGMATEK uses USB Type C connectors for products of the HGW and BHW series.
The required cable type can be found in the product handbook.
INFORMATION
Under certain conditions, it may be necessary to install the required
drivers for the SIGMATEK controls.
After successfully configuring, a new panel with the designation “Sigmatek Plc (COMx)” can
be found in the Windows device manager under “Connections (COM & LPT)”. The port
number assigned depends on your system.
8.2 Connecting with LASAL CLASS 2
To adapt the device configuration, the files must be edited via the LASAL CLASS 2 File
Commander.
17.05.2022 Page 45