background image

10 

12)ORDINARY MAINTENANCE 

ANY CHECK OR MAINTENANCE OPERATION SHOULD BE 
CARRIED OUT ONLY WHEN THE MIXER IS UNPLUGGED AND 
POWER IS DICONNECTED.

 The machine does not need particular 

maintenance operations. Check worn-out level of the belts after the 

first three months 
 
 
 
 
 

 

 

 
 
 
 
 
 
 
ATTENTION: 

The machine is not waterproof, therefore whatever cleaning process must 

not involve a jet of water. 

 

If the power supply cable becomes damaged it must be substituted with a 

H07RN/F 

cable 

with a cross-sectional measurement of 3x1,5 mm

2

 . 

 

To tighten the belt 
unscrew the motor’s 
bolts and lever with a 
screwdriver.Close the 
motor’s bolts,replace 
the cover and test the 
machine 
 

 

Problems with the 
micro of the bowl: 
remove the back 
cover,  check the 
functioning, replace 
the cover and test the 
machine

 

Problems with the 
micro of the grid: 
remove the cover that 
protects the gears, 
check the functioning,  
replace the cover and 
test the machine. 

 

When the tool’s pin is 
broken remove the tool, 
close it in a vice, remove 
the pin with the 
appropriate tool F 5-6 
mm, insert a new pin and 
attach the tool to the 
shaft. 

Содержание PE 7.5
















Отзывы: