20
MULTI FLASH MODE
While the shutter is open, the flash will fire repeatedly. By doing so a series of images of the subject will be
exposed in one frame. A
bright subject with a dark background
shows more effectively in this mode. It is
possible to set the firing frequency between 1Hz and 199Hz. Up to 100 flashes can be fired continuously.
The maximum number of flashes varies, depending on the
flash’s power output
and firing frequency
settings. (Please refer to
table 3
on the last page).
◆
This function cannot be used with EOS 700, 750, 850 cameras.
1. Set the camera’s exposure mode to M
mode and
set the F
number.
2. Press the MODE button until the Multi-flash mode
appears.
3. Press the SEL button until the flash firing frequency starts to blink.
4. Press the + or - button to set the desired flash frequency value.
5. After pressing the SEL button again, the flash power level will blink.
6. Press the + or - button to set the desired power level.
7. Press the SEL button again, the number of flashes will blink.
8. Press the + or - button to set the desired number of flashes.
9. Press the SEL button again, the display will stop blinking.
10. When the ready light of the flash is illuminated, the unit is ready to use.
Note:
Please set the shutter speed longer
than; Number
of Flashes you want
÷
Firing Frequency
BOUNCE FLASH
When you take a photo with flash in a room, sometimes a strong shadow will appear behind the subject, if
you point the flash head upwards or sideways to reflect the light off the ceiling, wall etc. the subject will be
illuminated softly. Press the lock button and adjust the flash head to set the bounce angle.
UP: 0°, 60°, 75°, 90°
DOWN: 0°,7°
RIGHT: 0°, 60°, 75°, 90
°
LEFT: 0°, 60°, 75°,90°, 120°, 150°, 180°
When the bounce flash mode is activated, a bounce indicator will
appear on the LCD panel.
Choose a white surface for bouncing the flash, otherwise the image’s
colour may be incorrect.
Depending on the reflecting surface, the subject distance and other
factors, the effective distance range for the TTL AUTO may change.
Please check for correct exposure confirmation (ETTL or TTL mark on
the LCD panel) after releasing the shutter.
Close-up Exposures
Bounce
flash can be tilted 7° downward for close-ups. The Flash will be effective only for the subjects 0.5
meter to 2 meters. When the flash head is tilted
7°,
will blink.
WIRELESS FLASH
When
using
the “Wireless Flash” mode, you can take pictures with a more three-dimensional
feeling, or
make
natural images by
using
shadow
ing
depending on the flash position
. This can be done without
any
extension cord connecting
the camera body and flash. In case of
the
EF-530 DG SUPER, communication
between the camera body and the flash will be
achieved
by the light
produced by
the flash. In the “Wireless
Flash” mode, the camera will calculate the correct exposure automatically.
◆
The
type A
camera
models can
be used with “Wireless Manual Flash” and “Wireless Multi Flash”
functions only. The EOS750 and EOS850 cannot be used with “Wireless Flash”.
◆
In this
instruction we
call
the
flash
unit which
is attached to the camera body
the
“Master unit ” and we
call a flash unit at a remote position
a
“Slave unit”.
◆
When setting a slave unit at the desired position, you can use
the
mini-stand
provided
. This mini-stand
has a screw hole for a tripod.
◆
Place the slave flash unit at the desired location. Do not place the slave unit within the picture area.
◆
Set
the flash unit within the range of 0.5m/1.5ft~5m/16ft from the subject and set the camera body within
the range of 1m/3ft~5m/16ft from the subject.
