3-30K
Set-up and Connection
22
Version 12/2008, Rev. 1.11 of 27/01/2012
Translation of the original operating manual
5
Set-up and Connection
5.1 Unpacking the Centrifuge
The centrifuge is packaged in a wooden crate.
After taking off the lid, remove the side panels.
Remove the packaging material.
Lift the centrifuge upwards with a lifting device to lift it safely.
When lifting the centrifuge, always reach under the centrifuge
from the side.
The centrifuge weighs approx. 100 kg!
Retain the packaging for any possible future transport of the
centrifuge.
5.2 Transport Safety Device
The transport safety device consists of two plastic screws which are
located at the bottom panel..
The transport safety device must be removed prior to start-up
because the screws lock the motor bearings!
Removal:
Lift the centrifuge upwards at the front side. Always reach under
from the side.
Put a suitable object, e.g. a wooden block, between table and
centrifuge. A coloured plastic screw can now be seen at the
bottom panel.
Unscrew the screws by hand anti-clockwise.
Retain the transport safety device for the possibility of the return
of the centrifuge.
