Sigma 3-16L Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 79

Sigma 3-16L Скачать руководство пользователя страница 30

Laboratory Centrifuge Sigma 3-16L

Laboratory Centrifuge Sigma 3-16L IVD

6 Using the centrifuge

30 / 79

Version 03/2014, Rev. 2.11 of 11/08/2017

• sb

Translation of the original operating manual, part no. 0700902

Centrifugation with low capacity

• Install the tubes axial symmetrically so that the buckets and their inserts

are loaded evenly.

• It is not permissible to load angle rotors on only one axis.

correct

incorrect

Fig. 8: Permissible and impermissible loading of an angle rotor and a swing-out rotor

(example illustrations)

Pos : 112 /010 Uni vers almodul e/ Leerz eile @ 0\ mod_1202116244500_0.doc x @ 114 @ @ 1

Pos : 113 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/060 Betrieb_Spi nc ontr ol L+S/ 060- 0020-0020-0040 Adapt er - nur L+S @ 27\ mod_1405319210191_68. doc x @ 192563 @ 4 @ 1



6.2.2.4

Adapters

In order to ensure easy handling, even if vessels of various sizes are used,
carrier systems were developed.
• Load the opposite adapters with the same number of vessels and with

the same weights in order to avoid imbalance.

• If all of the compartments of a carrier are not used, the buckets must be

loaded evenly. Loading the edges of a bucket only is not permissible.

Pos : 114 /010 Uni vers almodul e/ Leerz eile @ 0\ mod_1202116244500_0.doc x @ 114 @ @ 1

Pos : 115 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/060 Betrieb_Spi nc ontr ol L+S/ 060- 0020-0020-0050 Gefäß e ( auß er 4-5L) @ 27\ mod_1405319211622_68.doc x @ 192577 @ 4 @ 1



6.2.2.5

Tubes

• Load the tubes outside of the centrifuge. Liquids in the buckets or

multiple carriers cause corrosion .

• Fill the tubes carefully and arrange them according to their weight.

Imbalances result in the excessive wear of the bearings.

• In high-speed angle rotors, the vessels must be filled up to their useful

volume (= the volume stated for the vessel). If the vessels are only
partially filled, they will deform. This may result in leaks at the seals that
may become loose.

• When using glass tubes, the maximum value of 4,000 x g must not be

exceeded (except special high-strength glass tubes; please refer to the
information provided by the manufacturer).

• Follow the safety instructions and hazard warnings (see chapter 3 -

Pos : 116 /010 Uni vers almodul e/ Seit enwechs el @ 0\ mod_1202116244312_0.doc x @ 105 @ @ 1

«
...
28
29
30
31
32
...
»

Содержание 3-16L
















































































Отзывы:

Нет отзывов