Sigma 2-16PK, Руководство по эксплуатации

Страница: 23 / 77

Operating Manual SIGMA 2-16PK page 23 of 77
05/2007
4 Set-up and Connection
4.1 Unpacking the Centrifuge
The centrifuge is packaged in a slip-lid box.
•
Remove the upper part of the box.
•
Take out the box containing the accessories.
•
Remove the upper foam cushion.
•
Remove the slip-lid box.
•
Lift the centrifuge upwards with a lifting device or with a sufficient number of
people to lift it safely. When lifting or carrying the centrifuge, always reach
under the centrifuge from the side.
)
Attention!
The centrifuge weighs approx. 60 kg!
Please retain the packaging for any possible future transport of the centrifuge.
4.1.1 Transport Safety Device
The transport safety device of the SIGMA 2-16PK centrifuge consists of a foamed
plastic ring in the centrifuge chamber. It must be removed prior to start-up.
Procedure:
•
Open the lid. To do so,
−
use the emergency release of the lid (see 6.2.6, page 47) if the centrifuge
is not connected to the power supply
or
−
connect the centrifuge to the power supply and press the lid key.
•
Unscrew the rotor tie-down screw.
•
Remove the foamed plastic ring from the rotor chamber, by lifting it carefully
on one side.
•
Please retain the transport safety device for the possibility of the return of the
centrifuge.