SIGLENT SSA5083A, Руководство пользователя, Страница: 81 / 260

User Manual 51
Only valid when the current cursor is a differential marker
Example :CALCulate:MARKer2:RESEt:DELTa
3.7.4 Marker Postion
Displays and sets the position of the marker. Only the x-axis position can be set.
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:X
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:X?
Instructions Sets/gets the value of the marker point X axis
This command takes effect only when the marker mode is not OFF
：
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:STATe
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
If the marker readout type is frequency, the parameter is frequency.
When the marker readout type is time, the value is time. Reference
commands::CALCulate:MARKer[1]|2|3|4|5|6|7|8:X:READout
Parameter Type
frequency
，
Float
，
unitHz
、
kHz
、
MHz
、
GHz
，
default Hz
or time
，
Float
，
unitus
、
ms
、
s
、
ks
，
default s
Parameter Range 0 Hz ~ max span or 10 ms ~ 1000 s
Return
When the marker readout type is frequency, the reading is frequency, floating
point type, in Hz;
When the marker readout type is time, the reading is time, floating point type, in s;
When the marker readout type is cycle, the reading is cycle, floating point type,
unit s;
Example :CALCulate:MARKer4:X 0.4 GHz
:CALCulate:MARKer4:X 200 ms
:CALCulate:MARKer4:X?
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:Y
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:Y?
Instructions Read the value of the Y-axis of the marker point, which can also be used to read
the marker noise in the marker function.
To execute this command, ensure that the marker is in the
onstate.:CALCulate:MARKer[1]|2|3|4|5|6|7|8:STATe
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:MODE
Parameter Type Float
Parameter Range None