SIGLENT
SPD3000X QuickStart 27
3.1 Syntax Conventions
Most commands are a mixture of upper- case and lower-case letters. The
upper-case letters indicate the command's abbreviated spelling, which yields
shorter program lines. For better program readability, use the long form. For
example:
[{CH1|CH2}:]VOLTage <voltage>
For the keyword VOLTage, you can type VOLT or VOLTage in any combination
of upper- or lower-case letters. Therefore, VolTaGe, volt and Volt are all
acceptable. Other forms, such as VOL and VOLTAG, will generate an error.
Braces (
{ }
) enclose the parameter choices. The braces are not sent with
the command string.
A vertical bar (
|
) separates parameter choices. For example, {CH1|CH2}
in the above command indicates that you can specify a channel. The bar is
not sent with the command string.
Angle brackets (
< >
) indicate that you must specify a value for the
enclosed parameter. For example, the above syntax statement shows the
<
voltage
> parameter in angle brackets. You must specify a value for the
parameter (for example "
CH1:VOLT 10"). The angle brackets are not
sent with the command string.
Optional parameters are enclosed in square brackets (
[ ]
). If you do not
specify a value for an optional parameter, the instrument uses a default
value. For example, {CH1|CH2} in the above command can be omitted (for
example, "VOLT 10"). In this case, the command would word on the
current channel. The brackets are not sent with the command string.
Содержание SPD3303X
Страница 2: ......
