SIGLENT SPD3303X, Быстрый старт

Страница: 24 / 45

SIGLENT
16 SPD3000X QuickStart
2.6 LAN setting
Operation steps
：
1. Connect the oscilloscope to your local area network using the network
cable.
2. Press the
“
IP/Store
” button to enter LAN setting interface.
3. Press the direction button to go to the DHCP line, then revolve the
multi-function knob to turn ON/OFF the DHCP, then press the multi-function
knob to make the setting effective

ON:
t
he DHCP server in the current network will assign the network
parameters (such as the IP address) for the instrument.

OFF: you can set the IP address, subnet mask, and gateway
manually.

Revolve the multi-function knob to change the digit

P
ress “Fine” to select the digit position

Press the direction button to move the cursor around

Press the multi-function knob to store the setting.(The setting is
effective only when the knob is pressed)
4. The left side of the interface will display the current network settings when
setup is completed.
5. Press
“
IP/Store
” again to exit current interface and return to main interface.